UNIQUE DESIGN FOR INCOMPARABLE EFFICIENCY
From the ultra-efficient technology of Turbomiser comes Circlemiser, the new and most efficient series of air cooled chillers present on the market.
The new Circlemiser series is characterized by incomparable performance and high efficiency levels, with an increase in EER up to + 15%, improving the already very high efficiency of Turbomiser technology.
The technological innovation of Circlemiser is in the design and development of special cylindrical condensers, and the installation of cascade flooded evaporators.
*EER = COP coefficient of performance (for cooling), in accordance with ANSI/AHRI STANDARD 551/591 (SI).
CASCADE FLOODED EVAPORATOR
Circlemiser chillers are equipped with cascade flooded evaporators, which lead to the reduction of the ΔT between evaporation temperature and outlet temperature of the fluid.
The cascade arrangement of the evaporators increases the evaporation temperature and, at the same time, reduces energy consumption. Using this type of evaporator Geoclima has been able to further increase efficiency across the range of the Turbomiser air cooled chillers.
+15% OF COOLING EFFICIENCY
Comparing the Circlemiser with traditional air cooled Turbomiser chillers, at the same AHRI/EUROVENT conditions and same size (with the same number of compressors, same model of compressors, same capacity), Circlemiser records an increase in EER up to +9.5% (with one compressor units) and up to +15% (with multi-compressor units), achieving a maximum EER value of 4.35.
From the comparison of Circlemiser with Turbomiser with Evaporative System, with a relative humidity of 50%, the efficiency ensured by Circlemiser is equivalent to the efficiency achievable with the Evaporative System, without costs and installation and maintenance conditions that come from the use of water for the evaporative system. Circlemiser represents therefore a valid alternative to the adiabatic units in those cases in which adiabatic configuration is not applicable.
The new Circlemiser series is available for air cooled Turbomiser units, both with R134a, and with HFO-1234ze refrigerants.